
27-EN
01GB05IVA-W520E.fm
ALPINE IVA-W520E 68-16909Z32-A (EN)
Display Setup Operation
1
Press SETUP on the unit.
The SETUP main screen is displayed.
• Touch [ ] on the source selection screen can also display the
SETUP main screen.
2
Touch [] of Display Setup.
The Display Setup screen appears.
3
Touch [], [] or [] etc., of the desired item to
change its setting.
Setting items:
Visual EQ* / Dimmer / Dimmer Low Level /
Function Guide Fade / Base Color /
Screen Alignment
* The setting is available in the visual source mode.
4
Touch [] to return to the previous screen.
Touch [Exit] to return to the main source screen that was
displayed before the setup operation was started.
• Immediately after changing the settings of Display Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF. Otherwise, the settings may not be changed.
The visual setting of Bright, colour, contrast, etc. can be adjusted in this
mode.
Setting item: Visual EQ
Further setting items:
Visual EQ* Bright Color* Tint* Contrast
Sharp* User Memory*
* The setting is unavailable in navigation mode.
Touch [] or [] etc., of the desired item to change its
setting.
• The settings are available in the visual source mode only.
• The further setting items can be changed by touching [ ]/[].
• Only one setting item can be displayed on each page, you can select
the desired brightness, picture tint, etc through the screen displayed.
Selecting the Visual EQ Mode (Factory’s setting)
You can select a mode suitable for the subject image.
Further setting item: Visual EQ
Setting contents: OFF (FLAT) / Night M. / Soft / Sharp / Contrast /
P-1 / P-2
• To return to the default video settings, set this function to OFF. Any
Visual EQ selection or changes made are reset their initial settings.
• If any adjustments are made to the existing Visual EQ selections
(Night M., etc.), “Custom” is displayed.
Adjusting Brightness
Further setting item: Bright
Setting content: -15 ~ +15
You can adjust the brightness between Min (-15) and Max (+15).
When it reaches the minimum or maximum point, the display
shows “Min” or “Max” respectively.
• When any Visual EQ Preset is selected, the brightness is
automatically adjusted according to the car’s interior lighting as
long as Auto is set in “Setting the Brightness of the Backlighting”
(page 28).
Adjusting Colour of Picture
Further setting item: Color
Setting content: -15 ~ +15
You can adjust the colour between Min (-15) and Max (+15).
When it reaches the minimum or maximum point, the display
shows “Min” or “Max” respectively.
• Colour adjustment can be made only in the iPod Video, DVD, Video
CD, AUX modes.
• Colour adjustment cannot be made if a Navigation system with the
RGB feature is connected.
Adjusting Tint of Picture
Further setting item: Tint
Setting content: G15 ~ R15
Adjust the colour from G15 to R15. “G Max” or “R Max” is
displayed at the maximum of each colour.
• Colour adjustment can be made only in the iPod Video, DVD, Video
CD, AUX modes.
• When the picture from the external input is set to PAL, you cannot
adjust the Tint.
• Tint adjustment cannot be made if a Navigation system with the RGB
feature is connected.
DISPLAY Setup
The Parking Brake must be engaged to access the Display mode
screen. Attempting to access this screen while driving will display
the warning-Can’t operate while driving.
The following steps 1 to 4 are common operations to each
“Setting item” of DISPLAY Setup. Refer to each section for
details.
Visual EQ Setting Operation
OFF (FLAT): Initial Setting
Night M.: Suitable for movies in which dark scenes
frequently appear.
Soft: Suitable for CGs and animated films.
Sharp: Suitable for old movies where images are not
clearly shown.
Contrast: Suitable for recent movies.
P-1: Recalls the Visual EQ mode being stored on
preset No.P-1 from “Storing Visual EQ” (page 28).
P-2: Recalls the Visual EQ mode being saved on
preset No.P-2 from “Storing Visual EQ” (page 28).
01GB00IVA-W520E.book Page 27 Thursday, June 10, 2010 4:15 PM
Comentários a estes Manuais